3WI.COM

HOTLINE: +86 13321952508
Prouducts
  • SCE SCI YS3060 Grating UV Spectrophotometer
  • ColorLite sph850
  • ColorLite TC4
  • Probe Head Adapter MA35-UK with d/8° geometry
  • Probe head adapter MA38
Contant

EMAIL: Jason@3nh.com sale0001@3nh.com

TEL: +86 13321952508

FAX:+86-21-61278128

Technological

Gloss meter how to choose?

2017-09-15 10:43      点击:
How do I choose a Gloss Meter?You first require a flat surface of approximately 2 by 0.5 (50 x 10mm) to position a glossmeter properly on a surface. If the surface area you have is smaller, then please choose our 3nh brand small aperture model NHG60M

Gloss meter how to choose?

 
You first require a flat surface of approximately 2" by 0.5" (50 x 10mm) to position a glossmeter properly on a surface. If the surface area you have is smaller, then please choose our 3nh brand small aperture model NHG60M glloss meter.
 
NHG60M Small Aperture Gloss Meter 1000 gu
 
One must now judge your product by how glossy it is. Most products fall into a semi gloss range. Some are matte and designed to have very low gloss and others such as metals or car finishes are very high. There are three types that cover the complete range of gloss, namely the 20 degree, the 60 degree and the 85 degree glossmeters. Certain industries however suggest a different angle. These industries are; paper, ceramic, film, and vinyl). If you fall into one of these industries, please read Gloss Meter Selection by Industry. Some customers produce a range of products from very glossy to matte, then you would require a Universal gloss meter that measures all three angles or maybe you only make products from semi gloss to very high gloss, than you need the 20, 60, 85 degree gloss meter (model NHG268 or HG268 gloss meter).
 
NHG268 Tri Angle Touch Screen Gloss Meter 2000gu with 20/60/85 degree
 
 
Low Gloss - 85°
For improved resolution of low gloss, a grazing angle of 85° is used to measure the surface. This angle is recommended for surfaces which measure less than 10 GU when measured at 60°.This angle also has a larger measurement spot which will average out differences in the gloss of textured or slightly uneven surfaces.
 
Medium or Semi Gloss - 60° - The Universal Measurement Angle
One must remember that all gloss levels can be measured using the standard measurement angle of 60°. This 60 degree angle is used as the reference angle for all products. So why choose some other another angle? Because for extreme gloss, one obtains better measurements with the complimentary angles of 85° or 20° often used for low and high gloss levels respectively.
 
45° Glossmeter
The 45 degree glossmeter is used primarily for the ceramics and film producing industries.
 
 
red gloss tiles
 
 
75° Glossmeter
The 75 degree glossmeter is used primarily for the paper and vinyl producing industries.

         High Gloss - 20°
The acute measurement angle of 20° gives improved resolution for high gloss surfaces. Surfaces that measure 70 GU and above at the standard angle of 60° are often measured with this geometry. The 20° angle is more sensitive to haze effects that affect the appearance of a surface. The different gloss of these two samples is more clearly shown in the 20° readings.

上一篇:Color Measuring Spectrophotometer
下一篇: How should I measure color fast