Evaluation of film camera image resolution focus focus YETE1

2017-10-25 Click:209

Evaluation of film camera image resolution focus focus YETE158 test card. The image quality assessment test card TE158 is designed to evaluate the image quality of film cameras and can be used in different formats of cameras. It consists of sector stars, several test elements, linear gray levels, and nine test blocks. A test chart is designed to evaluate the image quality of a film camera. It can be used in different formats of cameras. It has the following aspect ratio format tags:

1:1.375 35mm

1:1.66 S16mm

16:9 PAL Plus / HDTV

1:1.85

1:2

There are 3 different reduction markers:

35 mm film with 7.5x, 25X and 45x

S16 has 80.5x, 44.5x, and 13.4x

The image mounted on the stable 10mm plastic plate is composed of different test elements as described below:

1 and 16 stars with 36 sectors, 80mm in diameter, and 4 fan-shaped stars in diameter of 25mm. Fan segments are used for focusing cameras and for simple visual evaluation of the tested lenses.

2, test elements (TE142) are usually used for test resolution. In each group, right angle are two from C to K marker, and by a factor of 2 grade b.. This means dividing the number of rows in each of the two steps

Image quality assessment test card

Brand: ESSER, Essar, /Sine, Image

Model: TE158

Size: 800 x600mm

Material: high definition photographic paper

Ratio: 4:3

Type: reflex

Two. There are three different sizes of test components not only based on three different resolution scales, but also providing a higher range of possible resolution measurements. The resolution based on the scaling and field mark is given in the following table.

3 and 9 color blocks are used to evaluate the color reproduction of film material. The color section corresponds to the color of the Macbeth ColorChecker.

4 and nine order linear gray levels (D = 0.2-1.8).

TE142 small		LP/mm resolving power conversion factor
Marker area	Original edition	7.5x	25x	45x	13.4x	80.5x
C	8.3	62	208	375	112	671
D	5.9	44	147	265	79	473
E	4.2	31	104	188	56	336
F	3.0	22	73	133	40	238
G	2.1	16	52	94	28	168
H	1.5	11	37	66	20	118
I	1.0	7.5	26	47	14	84
J	0.75	5.6	19	33	10	60
K	0.5	4	13	23.5	7	42

TE142 middle		LP/mm resolving power conversion factor
field	original	25x	45x	80.5x
C	2.7	68	122	219
D	1.9	48	87	155
E	1.4	34	61	109
F	1.0	24	43	78
G	0.7	17	31	55
H	0.5	12	22	39
I	0.34	8.5	15	27
J	0.24	6	11	19
K	0.17	4	8	14

TE142 large		LP/mm resolving power conversion factor
field	original	25x	45x	80.5x
C	1.8	45	81	146
D	1.28	32	58	103
E	0.9	23	41	73
F	0.64	16	29	52
G	0.45	11	20	36
H	0.32	8	14	26
I	0.23	6	10	19
J	0.16	4	7	13
K	0.1	2	4	8

PRE : ISO12233 resolution test, image resolution ImageResolut Test
NEXT : TE252 CIPA chart resolution target test card